DIRECTIONS FOR USE

For Spas ONLY (Not for swimming pool use)

It is a violation of Federal Law to use this product in a manner inconsistent with its labeling.

BROMICharge™ is designed to be used in conjunction with BROMITRON™, an electrolysis unit that converts bromide into hypobromite solution. The produced hypobromite solution (bromine) is then introduced into the spa to be treated as a sanitizer for spa water.

BROMICHARGE DOSAGE:

Upon dumping of spa water, every 60 days add 1.2 pounds of BROMICharge™ per 100 gallons of spa water to a spa equipped with a BROMITRON™ Bromine Generator. This will establish sufficient bromide reserve for the bromine generator to operate properly. This same treatment should be followed every 60 days upon draining and refilling the spa with fresh water or if the water turns cloudy.

MAINTENANCE:

A BROMITRON™ Bromine Generator will operate to produce bromine as designed until the bromide reserve drops below required levels. BROMICharge™ should be added if the bromide level drops below 10-30% of the initial charge. Dilution, splash out and leaks are primary reasons for the bromide level to drop. If the bromine generator does not produce enough bromine make sure the recommended level of 1440 ppm is still present in the spa water. The level can be tested with a TDS meter (Total Dissolved Solids), or by taking a water sample to a spa/pool store. If BROMICharge™ is being added repeatedly the spa should be checked for leaks. 

continue to page 5   >>>