SPA BROMINE GENERATOR

INSTALL AND OPERATION

MANUAL

The purpose of the BROMITRON™ BROMINE GENERATOR is to reliably maintain a halogen presence in a given recreational body of water automatically, whether the tub owner remembers to treat the water, or not.

Proper bromine levels and chemistry should be checked regularly by hot tub owners with the use of a standardized test kit.

The BROM1TRON™ SPA CANISTER AND UNIT should be installed before your spa is filled with water. If this is an after market installation drain the water and install the BROMITRON™ SPA CANISTER in the return line after the heater circulation pump. This pump should be a continuous run pump.

NOTE: The canister must be installed in an upright position to avoid any air pockets inside the canister. Air pockets will reduce the amount of bromine produced. YOUR BROM1TRON™ UNIT SHOULD NOT HAVE POWER TO THE CANISTER IF THERE IS "0" WATER FLOW.

Mount the TOPSIDE CONTROL PANEL and plug in the BROM1TRON™ SPA TRANSFORMER. Refill the spa when the installation is complete and check for leaks.

continue to page 3   >>>